"Super martensitic stainless steel" improvements of martensite stainless steel smelting process, reduce the carbon content, increase the nickel molybdenum alloy elements, performance is superior to the conventional martensitic stainless steel, not only has good corrosion resistance, weldability, and have the characteristics of [TJC STAINLESS]high strength and low temperature toughness good, in hydropower, mining equipment, chemical equipment, food industry, transportation, and high temperature pulp production equipment in areas such as highly potential applications.
S-135 (00Cr13Ni5Mo), namely 04Cr13Ni5Mo, is an ultra-low carbon martensitic stainless steel developed on the basis of CA-6nm cast steel, [TJC STAINLESS]which is a typical type of super martensitic stainless steel.
STANDARDS
CHINA TISCO 00Cr13Ni5Mo
S-135
GB/T 20878-2007
GB/T 3280-2015
GB/T 4237-2015 04Cr13Ni5Mo
S41595
JB/T 7349-2002 ZG06Cr13Ni5Mo
USA ASTM A182-10a F6NM，S41500
JAPAN JIS G 3214:2009 SUS F6NM
JIS G 5121:2003 SCS6
GEMANY DIN EN 10088-2:2005 X3CrNiMo13-4
1.4313
CHEMICAL COMPOSITIOIN（%）
GRADE S-135 04Cr13Ni5Mo
F6NM,SUSF6NM 1.4313
C ≤0.03 ≤0.05 ≤0.05
Si ≤0.60 ≤0.60 ≤0.70
Mn ≤0.80 0.50~1.00 ≤1.50
P ≤0.035 ≤0.030 ≤0.040
S ≤0.030 ≤0.030 ≤0.015
Cr 13.0~14.0 11.5~14.0 12.0~14.0
Ni 4.0~6.0 3.5~5.5 3.5~4.5
Mo 0.5~1.0 0.5~1.0 0.3~0.7
N -- -- ≥0.02
CHARACTERISTICS
S-135 steel abandoned the strengthening [TJC STAINLESS]means of high carbon martensite and forming carbides, and took the formation of low carbon martensite with high toughness and the addition and strengthening of nickel and molybdenum alloy elements as the main strengthening means.Through proper heat treatment, it has the composite structure of low carbon lamellar martensite and reversed austenite, so that it not only retains the high strength level, but also has good toughness and weldability.In [TJC STAINLESS]addition, the steel also has excellent erosion resistance, wear resistance, corrosion resistance, can meet the water conservancy project flow parts to bear sediment erosion requirements for a long time.
APPLICATIONS
S-135 steel is mainly used for high strength load-bearing parts that need to be welded.The most common is as a hydroelectric steel, used for the manufacture of water turbine equipment abrasion resistance runner and runner lower ring;In the petroleum industry, used as CO2, H2S corrosion resistance and on-site welding [TJC STAINLESS]pipeline;In the nuclear industry, it is used in PWR 2, 3 stage auxiliary pump drive shaft and control rod drive mechanism.
S-135 (00Cr13Ni5Mo), namely 04Cr13Ni5Mo, is an ultra-low carbon martensitic stainless steel developed on the basis of CA-6nm cast steel, [TJC STAINLESS]which is a typical type of super martensitic stainless steel.
STANDARDS
CHINA TISCO 00Cr13Ni5Mo
S-135
GB/T 20878-2007
GB/T 3280-2015
GB/T 4237-2015 04Cr13Ni5Mo
S41595
JB/T 7349-2002 ZG06Cr13Ni5Mo
USA ASTM A182-10a F6NM，S41500
JAPAN JIS G 3214:2009 SUS F6NM
JIS G 5121:2003 SCS6
GEMANY DIN EN 10088-2:2005 X3CrNiMo13-4
1.4313
CHEMICAL COMPOSITIOIN（%）
GRADE S-135 04Cr13Ni5Mo
F6NM,SUSF6NM 1.4313
C ≤0.03 ≤0.05 ≤0.05
Si ≤0.60 ≤0.60 ≤0.70
Mn ≤0.80 0.50~1.00 ≤1.50
P ≤0.035 ≤0.030 ≤0.040
S ≤0.030 ≤0.030 ≤0.015
Cr 13.0~14.0 11.5~14.0 12.0~14.0
Ni 4.0~6.0 3.5~5.5 3.5~4.5
Mo 0.5~1.0 0.5~1.0 0.3~0.7
N -- -- ≥0.02
CHARACTERISTICS
S-135 steel abandoned the strengthening [TJC STAINLESS]means of high carbon martensite and forming carbides, and took the formation of low carbon martensite with high toughness and the addition and strengthening of nickel and molybdenum alloy elements as the main strengthening means.Through proper heat treatment, it has the composite structure of low carbon lamellar martensite and reversed austenite, so that it not only retains the high strength level, but also has good toughness and weldability.In [TJC STAINLESS]addition, the steel also has excellent erosion resistance, wear resistance, corrosion resistance, can meet the water conservancy project flow parts to bear sediment erosion requirements for a long time.
APPLICATIONS
S-135 steel is mainly used for high strength load-bearing parts that need to be welded.The most common is as a hydroelectric steel, used for the manufacture of water turbine equipment abrasion resistance runner and runner lower ring;In the petroleum industry, used as CO2, H2S corrosion resistance and on-site welding [TJC STAINLESS]pipeline;In the nuclear industry, it is used in PWR 2, 3 stage auxiliary pump drive shaft and control rod drive mechanism.