AISI/SUS 301L STAINLESS STEEL COIL/SHEET
|
MIN ORDER: 500KGSDESCRIPTION:
A240/SUS 301L contains less C% than 301,can keep a good performance without heat treatment.They will be taken into use for form,restaurant equipment,cooking utensils,sinks,automotive trim,architectural applications such as windows and doors,railway cars,trailers and hose clamps,etc |
1.Standard:
ASTM A240/A240M-A240 301L;JIS G 4304-SUS 301L;UNS-S30103
2.Type:
Austenitic Stainless Steel
3.Surface:
NO.1-301L NO.1;BA-301L BA;2B-301L 2B,etc
4.Processing Way:
Hot Rolled,Cold Rolled
5.Treatment:
Pickled,Quenched,Tempered,Annealed
6.Chemical Composition:%
C Mn P S Si Cr Ni Mo N Cu Other
0.03 2.00 0.045 0.03 1.00 16.0-18.0 6.0-8.0 -- 0.2 -- --
7.Mechanical Property:
Tensile Strength MPa , Yield Strength MPa, Elongation in 2in.or 50mm,%, Hardness Rockwell B
550 220 45 100
8.Application Area:
A240/SUS 301L contains less C% than 301,can keep a good performance without heat treatment.They will be taken into use for
form, restaurant equipment,cooking utensils,sinks,automotive trim,architectural applications such as windows and doors,railway
cars,trailers and hose clamps,etc
TJC Stainless is the most competitive manufacture and supplier of 301L stainless steel in thickness 0.3mm-80mm and width up to
2200mm.Other special requests about specification,please contact us.
Click Here to See PDF Details for AISI/SUS 301L Stainless Steel Coils/Sheets
ASTM A240/A240M-A240 301L;JIS G 4304-SUS 301L;UNS-S30103
2.Type:
Austenitic Stainless Steel
3.Surface:
NO.1-301L NO.1;BA-301L BA;2B-301L 2B,etc
4.Processing Way:
Hot Rolled,Cold Rolled
5.Treatment:
Pickled,Quenched,Tempered,Annealed
6.Chemical Composition:%
C Mn P S Si Cr Ni Mo N Cu Other
0.03 2.00 0.045 0.03 1.00 16.0-18.0 6.0-8.0 -- 0.2 -- --
7.Mechanical Property:
Tensile Strength MPa , Yield Strength MPa, Elongation in 2in.or 50mm,%, Hardness Rockwell B
550 220 45 100
8.Application Area:
A240/SUS 301L contains less C% than 301,can keep a good performance without heat treatment.They will be taken into use for
form, restaurant equipment,cooking utensils,sinks,automotive trim,architectural applications such as windows and doors,railway
cars,trailers and hose clamps,etc
TJC Stainless is the most competitive manufacture and supplier of 301L stainless steel in thickness 0.3mm-80mm and width up to
2200mm.Other special requests about specification,please contact us.
Click Here to See PDF Details for AISI/SUS 301L Stainless Steel Coils/Sheets