Al-6XN is a super austenitic stainless steel developed and produced by Allegheny Technologies in the United States, with a density of [TJC STAINLESS]8.06g/cm3.The composition of Al-6XN is similar to that of 926 alloy.
Component Specification
GRADE AL-6XN Alloy 926
UNS N08367 N08926
C ≤0.030 ≤0.020
Si ≤1.00[TJC STAINLESS] ≤0.50
Mn ≤2.00 ≤2.00
P ≤0.040 ≤0.030
S ≤0.030 ≤0.010
Ni 23.50~25.50 24.00~26.00
Cr 20.00~22.00 19.00~21.00
Mo 6.0~7.0 6.0~7.0
Cu ≤0.75 0.5~1.5
N 0.18~0.25 0.15~0.25
Performance Characteristics：
(1) The high ratio of Cr, Mo, Ni and N alloy has good resistance to pitting corrosion, crack corrosion, intergranular corrosion and stress corrosion in various acidic corrosive environments containing chloride ions. The [TJC STAINLESS]comprehensive corrosion resistance is better than 316L, which is close to nickel-based alloy.
(2) Good mechanical properties, compared with the conventional austenitic stainless steel such as 304,316,317, has a higher tensile [TJC STAINLESS]strength, while maintaining excellent material toughness and impact strength.
(3) Excellent welding performance, easy to manufacture and install on site.
Applications：
Al-6XN alloys are ideal for the following applications:
-- Chemical treatment tanks and pipes
-- Process systems for offshore oil and gas platforms
-- Condensers, heat exchangers [TJC STAINLESS]and pipes containing seawater or crude oil
-- Filter washers, vats and press rollers in pulp bleaching plants
-- Flue gas scrubber environment of power plant
-- Tall distillation tower and packaging
-- Desalination equipment and pumps
-- Water piping system for nuclear power plants
-- Transformer boxes exposed to the Marine environment
-- Pharmaceutical equipment (purification)
-- Food processing equipment
Component Specification
GRADE AL-6XN Alloy 926
UNS N08367 N08926
C ≤0.030 ≤0.020
Si ≤1.00[TJC STAINLESS] ≤0.50
Mn ≤2.00 ≤2.00
P ≤0.040 ≤0.030
S ≤0.030 ≤0.010
Ni 23.50~25.50 24.00~26.00
Cr 20.00~22.00 19.00~21.00
Mo 6.0~7.0 6.0~7.0
Cu ≤0.75 0.5~1.5
N 0.18~0.25 0.15~0.25
Performance Characteristics：
(1) The high ratio of Cr, Mo, Ni and N alloy has good resistance to pitting corrosion, crack corrosion, intergranular corrosion and stress corrosion in various acidic corrosive environments containing chloride ions. The [TJC STAINLESS]comprehensive corrosion resistance is better than 316L, which is close to nickel-based alloy.
(2) Good mechanical properties, compared with the conventional austenitic stainless steel such as 304,316,317, has a higher tensile [TJC STAINLESS]strength, while maintaining excellent material toughness and impact strength.
(3) Excellent welding performance, easy to manufacture and install on site.
Applications：
Al-6XN alloys are ideal for the following applications:
-- Chemical treatment tanks and pipes
-- Process systems for offshore oil and gas platforms
-- Condensers, heat exchangers [TJC STAINLESS]and pipes containing seawater or crude oil
-- Filter washers, vats and press rollers in pulp bleaching plants
-- Flue gas scrubber environment of power plant
-- Tall distillation tower and packaging
-- Desalination equipment and pumps
-- Water piping system for nuclear power plants
-- Transformer boxes exposed to the Marine environment
-- Pharmaceutical equipment (purification)
-- Food processing equipment