Chemical Composition
JIS G4305 SUS310S cold-rolled stainless steel plate boasts an impressive chemical composition that provides exceptional corrosion resistance and high-temperature strength. Its primary alloying elements are chromium (Cr) and nickel (Ni), with significant additions of silicon (Si). The detailed chemical composition of SUS310S, as per JIS standards, is as follows:
Mechanical Properties
The mechanical properties of SUS310S cold-rolled stainless steel plate make it suitable for applications requiring high strength and durability. Key mechanical properties include:
Heat Treatment State
JIS G4305 SUS310S cold-rolled stainless steel plate is typically supplied in a solution-annealed condition, ensuring optimal corrosion resistance and mechanical properties. Solution annealing involves heating the steel to a temperature above its critical point, holding it for a sufficient time to allow for complete dissolution of carbides and other precipitates, and then cooling rapidly to prevent re-precipitation. This process results in a microstructure that is both corrosion-resistant and mechanically stable.
Available Production Sizes
TJC Steel Group offers JIS G4305 SUS310S cold-rolled stainless steel plates in a wide range of sizes to meet various application requirements. Typical dimensions include:
Low-Temperature Impact Test
While SUS310S is primarily known for its high-temperature performance, it also exhibits good low-temperature toughness. Low-temperature impact testing is conducted to ensure that the steel can withstand sudden changes in temperature without cracking or failure. The specific results of these tests will depend on the steel's microstructure and heat treatment history but are generally satisfactory for most low-temperature applications.
Main Application Scenarios
JIS G4305 SUS310S cold-rolled stainless steel plate finds widespread applications in various industries due to its exceptional corrosion resistance and high-temperature strength. Some of the key application scenarios include:
TJC Steel Group, as a leading supplier of stainless steel products, has successfully supplied JIS G4305 SUS310S cold-rolled stainless steel plates to numerous clients across various industries. Here are a few notable supply cases:
JIS G4305 SUS310S cold-rolled stainless steel plate boasts an impressive chemical composition that provides exceptional corrosion resistance and high-temperature strength. Its primary alloying elements are chromium (Cr) and nickel (Ni), with significant additions of silicon (Si). The detailed chemical composition of SUS310S, as per JIS standards, is as follows:
- Chromium (Cr): Approximately 25%
- Nickel (Ni): Approximately 20%
- Silicon (Si): Approximately 2%
Mechanical Properties
The mechanical properties of SUS310S cold-rolled stainless steel plate make it suitable for applications requiring high strength and durability. Key mechanical properties include:
- Tensile Strength: High, suitable for demanding applications
- Yield Strength: Adequate to withstand heavy loads
- Elongation: Good ductility, enabling it to be formed into various shapes
- Hardness: Moderate to high, depending on the heat treatment process
Heat Treatment State
JIS G4305 SUS310S cold-rolled stainless steel plate is typically supplied in a solution-annealed condition, ensuring optimal corrosion resistance and mechanical properties. Solution annealing involves heating the steel to a temperature above its critical point, holding it for a sufficient time to allow for complete dissolution of carbides and other precipitates, and then cooling rapidly to prevent re-precipitation. This process results in a microstructure that is both corrosion-resistant and mechanically stable.
Available Production Sizes
TJC Steel Group offers JIS G4305 SUS310S cold-rolled stainless steel plates in a wide range of sizes to meet various application requirements. Typical dimensions include:
- Thickness: From 0.3 mm to 3.0 mm
- Width: Up to 1600 mm (depending on the thickness)
- Length: Customizable to customer specifications
Low-Temperature Impact Test
While SUS310S is primarily known for its high-temperature performance, it also exhibits good low-temperature toughness. Low-temperature impact testing is conducted to ensure that the steel can withstand sudden changes in temperature without cracking or failure. The specific results of these tests will depend on the steel's microstructure and heat treatment history but are generally satisfactory for most low-temperature applications.
Main Application Scenarios
JIS G4305 SUS310S cold-rolled stainless steel plate finds widespread applications in various industries due to its exceptional corrosion resistance and high-temperature strength. Some of the key application scenarios include:
- Petrochemical Industry: For piping, tanks, and other equipment exposed to high-temperature and corrosive environments.
- Power Generation: In boilers, heat exchangers, and other components operating at high temperatures.
- Automotive Industry: For exhaust systems and other components requiring high-temperature durability.
- Chemical Processing: For containers, reactors, and other equipment handling aggressive chemicals.
- Aerospace Industry: For components exposed to extreme temperatures and harsh environments.
TJC Steel Group, as a leading supplier of stainless steel products, has successfully supplied JIS G4305 SUS310S cold-rolled stainless steel plates to numerous clients across various industries. Here are a few notable supply cases:
- Petrochemical Plant Upgrade: TJC supplied SUS310S plates for the construction of new piping and tanks in a petrochemical plant undergoing an expansion project. The plates' high-temperature resistance and corrosion resistance ensured reliable performance in the plant's harsh operating conditions.
- Power Plant Renovation: For the renovation of a coal-fired power plant, TJC provided SUS310S plates for the replacement of worn-out boiler components. The plates' excellent mechanical properties and heat treatment state ensured a seamless integration with the existing plant infrastructure.
- Automotive Exhaust System: In collaboration with an automotive OEM, TJC supplied custom-cut SUS310S plates for the production of high-performance exhaust systems. The plates' durability and resistance to high temperatures ensured optimal performance in extreme driving conditions.